Disposable Gloves
Product Details:
|
Stretch Vinyl Industrial Glove, Powder Free, Non-sterile |
|
Polyvinyl Chloride paste resin |
|
Beige or White |
|
Ambidextrous, beaded cuff |
|
Inside absorbable cornstarch USPXX1 |
|
The gloves shall maintain their properties when stored in a dry condition at temperature between 10 to 40˚ C. Protect gloves against ultraviolet light sources, as sunlight and oxidizing agents. Copper ions discolor the glove. |
|
The gloves shall have shelf life of 2 years from the date of manufacture with the above storage condition. |
|
100 pcs gloves x 10 dispensers x 1 carton |
|
The size of gloves shall be marked in the check box on every carton with black ink. |
PERFORMANCE REQUIREMENTS
| # | Characteristics | Inspection Level | Acceptable Quality Level | Reference Standard |
| 2.1 | Dimensions | S2 | 4.0 | ASTM D5250-00 EN455-2-00 |
| 2.2 | Physical Properties | S2 | 4.0 | ASTM D5250-00 EN455-2-00 |
| 2.3 | Freedom from holes (Barrier) (1000ml Water Leak Test) |
S4 | 4.0 | FDA 1000MIL Test Method ASTM D5151-92 EN455-1-00 |
| 2.4 (i) (ii) |
Visual Defects:
|
S4 | 2.5 4.0 |
In-house practice |
| 2.5 | Powder Amount | N=2 | – | ASTM D5250-00 ASTM D6124-01 |
| 2.6 | Gloves Counting (Gloves per Dispenser) |
S2 | 4.0 | In-house practice |
| 2.7 | Others Mix Size / Mix Glove / Mix Hand |
Not | Allowed |
PERFORMANCE SPECIFICATION
3.1 Dimensions
| Property | Size | In-House Standard |
| Length (mm) | All sizes | Min 230 |
| Palm Width (mm) | XS S M L XL XXL |
78 +/- 3 85 +/- 3 95 +/- 3 105 +/- 3 115 +/- 3 125 +/- 3 |
| Thickness (mm) *single wall |
All Sizes | Finger : 0.10 +/- 0.02 Palm : 0.09 +/- 0.02 Cuff : 0.07 +/- 0.02 |
3.2 Physical Properties
| Property | In-House Standard |
| Before Aging & After Aging | |
| Elongation at break (%) | Min 350 |
| Tensile Strength (MPa) | Min 12 |
| Force at break (N) | Min 3.6 |
3.3 Freedom from holes (Barrier) (1000ml Water Leak Test)
The sample size and allowable number of non-conforming gloves in the samples shall be determined in accordance to ISO 2859-1 using Special Inspection Level S4 with an AQL of 4.0.
3.4 Visual Defects
The sample size and allowable number of non-conforming gloves in the samples for each of major and minor defects shall be determined in accordance to ISO 2859-1 using Special Inspection Level S4 with AQL of 2.5 and 4.0 respectively.
