Here’s a detailed introduction to CE EN455 and the associated testing methods for medical examination gloves: 🧤 CE EN455 – Detailed Introduction EN 455 is a European standard for single-use medical gloves, ensuring their quality, safety, and performance. This standard is essential for gloves that are CE marked as Class I

The EN 352 standard is a European regulation that specifies safety requirements and testing methods for hearing protectors such as earplugs, earmuffs, and communication headsets. The primary goal of this standard is to ensure that hearing protection devices effectively reduce noise exposure and provide adequate comfort and usability for workers in

Prohibition Safety Signs • These signs warn of potential hazards to prevent accidents, suitable for industrial plants, construction sites, in-plant transportation, and other locations requiring safety awareness; • High-performance self-adhesive material for direct application on flat surfaces; • Material: Self-adhesive vinyl. Warning Safety Signs • These signs alert individuals to potential

​Sinomox Safety Co., Ltd., commonly known as SINOMOX, is a prominent Chinese supplier specializing in personal protective equipment (PPE). With over a decade of experience in the PPE industry, SINOMOX is dedicated to ensuring safety from head to foot by providing high-quality products, comprehensive services, and competitive pricing. Their commitment to

Frequently Asked Questions Q: What are Fall Alarm and Instant Alarm, and when are they used? A: The “Fall Alarm” has two levels: Low Alarm and High Alarm. When the device detects that the user has been stationary for 20 seconds, it triggers a Low Alarm, which can be canceled by

Solid Particle Protection Digit Protection Scope Description 0 No protection No special protection against external objects. 1 Objects >50mm Protects against large objects (e.g., hands). 2 Objects >12.5mm Protects against fingers and medium-sized objects. 3 Objects >2.5mm Protects against tools, wires, etc. 4 Objects >1.0mm Protects against small tools and wires.

Q: What is the service life of fall protection equipment? A: The service life of fall protection equipment is generally recommended to be 3 to 5 years, depending on the working environment and regular inspection results. Q: Can fall protection equipment continue to be used if it shows no visible damage

Scaffolding & Construction Roof Maintenance & Crane Maintenance General Factory High-altitude Work Electric Power Industry

1) Harness Donning Method – 6 Simple Steps to Save Your Life 2) Warnings: Failure to comply may result in life-threatening risks or severe damage to the fall protection system First Check: Pre-Use Inspection Second Check: Periodic Inspection Third Check: Disposal Protocol

Functions, Components, Selection, and Maintenance of Personal Fall Protection Systems*55 1. Functions of Personal Fall Protection Systems 1) Work Restraint Function ① Scope of Application: Do not use when there is a fall risk! ② Adjustment Method and Length: Adjust the working range via the connector’s length. Maximum length: 2m (GB6095-09/EN354).

Existing Hazards Methods to Eliminate Fall Hazards Three Steps to Hazard Elimination 1. Identify Hazards Understand the definitions of high-altitude standards in various countries, comprehend the degree of injury caused by fall impact forces, and identify workplaces and scenarios prone to fall risks. 1) Definition of High Altitude*49 2) Impact Force

Q: What are the differences and applications between rubber outsoles and polyurethane outsoles? A: Rubber outsoles can withstand high temperatures of 300 degrees Celsius for a short period of time, have stronger chemical corrosion resistance and physical wear resistance, or mid-cut safety shoes; polyurethane outsoles are lightweight and comfortable, and are

The Severity of Foot Injuries The situation of occupational hazards in industrial, mining, commercial and trade enterprises is very serious. One of the main injuries is foot injury, which is caused by stepping on objects, bumping into objects, splashing of hot or corrosive substances, and being crushed by falling objects during

Q: What is the chemical permeation time? A: Chemical permeation time refers to the time required for a chemical to initially come into contact with the outer surface of the fabric until it reaches the innermost layer (where the detection device can detect the chemical). For example, a permeation time of

Selection and Use of Protective Clothing(Disposable Coverall) Protective clothing is classified into the following four levels according to its different applications: Level A Level B Level C Level D Air-tight chemical protective suit Chemical protective suit with large splash resistance Chemical protective suit with small splash resistance Ordinary protective clothing General

1. Hazards to the Respiratory System Please refer to Table 3-1 Table 3-1 Hazards to the Respiratory System Type Name Characteristics Hazardous Consequences Particulates Tiny solid particles suspended in the air with a diameter of 0.1 – 10 micrometers (μm, 1 micrometer = one millionth of a meter). Generally produced by

Occupational Eye/Face Hazards Hazard Type Typical Harmful Agents Typical Job Roles Impact of solid particles Metal shavings, wood chips, stones Riveting, assembly, grinding, decoration, weeding Splash of harmful liquids Acids, alkalis, organic solvents Laboratory, chemical handling, transport, disposal Exposure to harmful light Ultraviolet (UV) light, laser Welding Light intensity Artificial strong

Wearing a Safety Helmet Before wearing a safety helmet, carefully inspect the certification, usage instructions, and expiration date. Adjust the harness size to ensure a space of 20-50 millimeters between the top of the harness and the inner shell. This space creates an energy-absorbing system that distributes impact forces across the

Performance Requirements for Safety Helmets Category Item Performance Requirements Basic Performance Impact Absorption After pretreatment (high/low temperature, water immersion, UV exposure), the force transmitted to the headform during impact testing shall not exceed 4900N, and no shell fragments shall detach. Basic Performance Penetration Resistance After pretreatment (high/low temperature, water immersion, UV

Safety Helmet Shell Material Characteristics Applicable Occasions Examples FRP Safety Helmet Its corrosion specific gravity is 1/4 – 1/6 of steel, and its mechanical strength is close to that of steel. It has a low thermal conductivity. It is resistant to high and low temperatures, corrosion, combustion, and has electrical insulation.

Q: How do I choose chemical-resistant gloves? A: Consider the type, concentration, and exposure method of chemicals, environmental temperature, and usage habits. Refer to the glove performance data tables in this manual or consult a safety product specialist. Q: How long can chemical-resistant gloves be used? A: Usage duration depends on